Anschutz 54.30 Benchrest BR-50 Walnut

Combines decades of perfection

The small bore action 54.30 offers everything a state-of-the-art small bore target rifle must have!

 

Barreled action - 54.30

The ANSCHÜTZ Target small bore barreled action 54.30 is the further development of the legendary ANSCHÜTZ Match 54 barreled action. Barreled action 54.30 combines new ideas and requirements from the modern target shooting with components that have been tried and tested for decades.

-Development based on the well-known and proven barreled action Match 54.

-The ejection window has been moved back by 30 mm and reduced in size by 18%, this improves the ergonomics when shooting and increases the stiffness of the case by 33%.

-The bolt and the firing pin were shortened by 30 mm.

-Weight of the firing pin has been reduced, thus reducing the locktime with the same force of the firing pin spring.

-Shooting performance is further improved by the newly developed match cartridge bearing. In the Barreled action Match 54.30, the barrel is screwed deeply into the sleeve in order to distribute the tension created in the joint as evenly as possible and over a large area.

-The Barreled action Match 54.30 can be installed in all stocks that fit the ANSCHÜTZ barreled actions 1907 or 1913.

-Maintenance-friendly and durable overall construction, as usual with ANSCHÜTZ.

 

Trigger - 5018

ANSCHÜTZ Triggers are known worldwide for their quality. The trigger 5018, which breaks like glass, leaves nothing to be desired. Factory adjusted trigger weight of 125 g. The trigger weight can be adjusted from 60 g - 490 g to suit your individual needs. The trigger blade can be moved, swivelled and adjusted in height. There is nothing better!

 

Stock - BR 50 Walnut

Specially developed for benchrest-shooting, the BR 50 benchrest stocks are crafted specifically for benchrest shooting in sturdy walnut wood. The natural stock is equipped with a very wide and flat fore-end to obtain a maximum contact surface to provide a stable platform for the utmost accuracy.

-The rubber butt plate 4709A can be adjusted in height and length of pull.

-Butt plate offers a wide and non-slip contact surface in the shoulder.

-The grip section of the stock is kept straight in order to guide the trigger hand always in the same position to the trigger, ensuring consistant and repeatable contact on the trigger blade.

-The wide and absolutely flat fore-end can be replaced quickly and easily if damaged. This guarantees a flat fore-end at all times.