The new Steyr Scout II. Your adventure awaits.
In the 90s Steyr Arms partnered with legendary US Marine, rifle expert and shooting instructor Lt.Col. Jeff Cooper to develop the MANNLICHER SCOUT.
Jeff Cooper wanted the rifle to be shorter than one meter and lighter than 3 kg. Its optic had to be mounted as far forward as possible and it had to have iron sights. This was to ensure secure target acquisition up to 400 meters. In addition to this, the MANNLICHER SCOUT carried a spare magazine in its butt stock.
The newly designed STEYR SCOUT II... Making perfect just a bit better.
To achieve even better accuracy, the housing and bedding block are milled from one piece of aluminum. Instead of the Weaver-Rail the STEYR SCOUT II integrates a top Picatinny-Rail and a M-LOK mount at 6 o‘clock at the forend.
In the 90s Steyr Arms partnered with legendary US Marine, rifle expert and shooting instructor Lt.Col. Jeff Cooper to develop the MANNLICHER SCOUT.
Jeff Cooper wanted the rifle to be shorter than one meter and lighter than 3 kg. Its optic had to be mounted as far forward as possible and it had to have iron sights. This was to ensure secure target acquisition up to 400 meters. In addition to this, the MANNLICHER SCOUT carried a spare magazine in its butt stock.
The newly designed STEYR SCOUT II... Making perfect just a bit better.
To achieve even better accuracy, the housing and bedding block are milled from one piece of aluminum. Instead of the Weaver-Rail the STEYR SCOUT II integrates a top Picatinny-Rail and a M-LOK mount at 6 o‘clock at the forend.
The lightweight bolt-action, all-purpose Steyr Scout II rifle was designed to accept a low-powered, forward-mounted scope for accurate fire and both-eyes-open operation to detect flanking dangers. Backup “ghost-ring” iron sights integrated to the top rail can be deployed within seconds should the optics fail. The rifle can also be fitted with a standard scope, should the need arise.
In keeping with Cooper’s requirement for a magazine cutoff, Steyr incorporated a two-position magazine system that allowed the rifle to be fed individually with the five-round magazine in a lowered position. The magazine could be seated one step further with minimal pressure, allowing the bolt to feed cartridges directly from the magazine. A second five-round backup magazine is contained in the buttstock in case of an urgent need to reload.
With a fluted, cold-hammer-forged barrel measuring 19 inches, an overall length of 38.6 inches and an out-of-the-box weight of just 6.6 pounds, the Scout is a breeze to pack out on long adventures, patrolling the farm or taking a quick trip to the range. The compact design of the stock features an innovative integrated bipod that is hardly noticeable until it is folded out from the stock. Between the bipod legs are 2 M-LOK slots for attachments, and the stock is outfitted with five press-and-twist sling-swivel attachment points that allow the addition of Cooper’s favored Ching Sling on either side of the rifle.
The Steyr Scout II is built on the Safe Bolt System (SBS) action with a unique 2+1 safety function that offers three settings operated by a wheel switch on the tang of the stock. The FIRE mode (safety off) is indicated by a red dot, and the first level of SAFE mode disables the firing mechanism while allowing the bolt to be cycled. The second SAFE position locks the bolt, at which point the bolt can be pushed down against the stock, locking the firing pin and firing mechanism out of firing position, allowing safe transportation with a round in the chamber. Simply pressing the safety’s release tab and rolling it forward returns the bolt to either the SAFE or the FIRE position.
The unique features make the Scout a self-contained platform that can easily be carried in a rifle scabbard without any need for attaching/detaching a bipod or finding extra pockets for a spare magazine, perfect for use on horseback, ATV or on a vehicle rifle rack.
FEATURES:
Cold Hammer Forged Barrel
STEYR Safe Bolt System (SBS)
MANNOX® surface
2 Stage Magazine
The 2+1 Safety System
Absolute reliability at temperatures ranging from +70°C to –40°C.
Ice and residue groove on the bolt body
4 point magazine catch design ensures perfect feeding at all times
Integrated bipod
M-LOK on forstock
Spare magazine in buttstock
Flip up emergency sights
NATO standard Picatinny rail
SPECIFICATIONS:
Caliber: .308 Win.
Operation: Bolt-action repeating rifle
Magazine type/capacity: Polymer double-stack detachable box/5 rounds (10-round kit optional)
Barrel: 485mm (19in), fluted, cold-hammer forged
Barrel Material: Steel
Barrel Finish: Mannox®
Barrel Thread: M15X1
Rifling:
Sights: Flip-up iron sights; integral top rail
Receiver Finish: Mannox®
Safety: 3+1 position safety
Trigger type: Single-stage adjustable
Stock material/type: Polymer with integrated bipod & M-LOK slots
Recoil pad: Elastomer with spacers to adjust length of pull
Sling swivels: Five removable push-and-turn-style positions available
Weight, empty: 3000g (6.6 lbs)
Overall length: 980mm (38.6 in) without spacer
Included accessories: Two magazines, three sling swivels, rubber muzzle cover, owner’s manual
PAL Required – Requires a valid PAL to purchase-NON-RESTRICTED FIREARM
Export-Restricted – Cannot ship outside of Canada.
